Used & Reconditioned Parts Washers for Sale
Used Parts Washers Available for Rebuild and Resale
Alliance Manufacturing reconditions used industrial heated parts washers. Used parts washers may have been purchased back from a customer who no longer has a need for their cleaning system or has had a change in their manufacturing process. We also take used cleaning machines in on trade for customers looking to upgrade their commercial parts washer for production increases or process changes. We will inspect, clean, and Level 1, Level 2 refurbish used parts washers and replace components if necessary. Reconditioned used parts washers may be purchased as-is or be adapted to fit your parts cleaning application.
Please scroll down to view all available used parts washers available for purchase.
Four (4) Nu/Clean™ 830 XLR FB
(#s t012, t013, t014, t020)
Machine type: Inline (Printed Circuit Board) PCB Washer w/ Flood Box™
Model: Nu/Clean™ 830 XLR FB
Serial number: T012-0524, T013-0524, T014-0524, T020-1024
Process stages/zones: Wash (with Flood Box™), Rinse (with Flood Box™) and heated dryer zones.
Belt Width: 30″ Wide X 3″ Tall Product Clearance
Heat type: Electric
Control system: Keyence PLC & HMI
Voltage: 380V/3PH/60Hz and 380V/3PH/50HZ
Full load amps: 449A
Accessories: Exhaust fan, chemical injection, Kyzen PCS, door safety interlock, D.I. 510 Recirculating Water Deionizer
General: Polypropylene fabrication, SS Pumps, Piping & Process
Status: Customer’s Facilities. Newly installed, non-production use.
Aquamate RI-4842 (Machine #966)
Machine type: Rotary Indexing Table Parts Washer
Model: Aquamate RI-4842
Serial number: 966-1219
Process stages/zones: Wash and timed compressed air blow-off
Turntable diameter: 48″ (accepts up to a 36″ tube)
Heat type: Electric
Control system: Allen-Bradley PLC and HMI
Voltage: 480V/3PH/60Hz
Full load amps: 117.1A
Accessories: Exhaust fan, micro-filtration, chemical injection, solution heat auto-timer, oil skimmer, door safety interlock, light curtain
General: Stainless steel fabrication, vertical solution pump
Status: Level 2 – In Process
Aquamate RI-4800 (Machine #968)
Machine type: Rotary Indexing Table Parts Washer
Model: Aquamate RI-4800
Serial number: 968-1219
Process stages/zones: Wash and timed compressed air blow-off.
Turntable diameter: 48″ (will accept a 36″ long tube)
Heat type: Electric
Control system: Allen-Bradley PLC and HMI
Voltage: 480V/3PH/60Hz
Full load amps: 117.1A
Accessories: Exhaust fan, micro-filtration, chemical injection, solution heat auto-timer, oil skimmer, door safety interlock, light curtain
General: Stainless steel fabrication, vertical solution pump
Status: Level 2 – In Process
Aquamaster CB-1400E (Machine #743)
Machine type: Conveyorized Belt Parts Washer
Model: Aquamaster CB-1400E
Serial number: 743-0315
Process stages/zones: Wash, heated blow-off
Heat type: Electric
Control system: Allen-Bradley PLC and HMI
Voltage: 480V/3PH/60Hz
Full load amps: 107.1A
Accessories: Mist collection system, micro-filtration, chemical injection, solution heat auto-timer, oil coalescer, contamination sensor, product sensor (load).
General: Stainless steel fabrication, horizontal solution pump
Status: Level 2 – In Process
Aquamaster RI-4800 (Machine #772)
Machine type: Rotary Indexing
Model: Aquamaster RI-4800
Serial number: 0772-1015
Process stages/zones: Wash, ambient blow-off
Turntable diameter: 48″
Heat type: Electric
Control system: Allen-Bradley PLC and HMI
Voltage: 480V/3PH/60Hz
Full load amps: 79.5A
Accessories: Exhaust fan, micro-filtration, chemical injection, solution heat auto-timer, oil skimmer, door safety interlock, light curtain
General: Stainless steel fabrication, vertical solution pump
Status: Level 2 – In Process
Please note: This photo is of the machine as originally sold.
Aquamaster CB-2400 (Machine #37) – SOLD
Machine type: Conveyorized Belt
Model: Aquamaster CB-2400
Serial number: 037-1196
Process stages/zones: Wash, ambient blow-off
Product capacity: 24″ wide x 18″ tall
Heat type: Electric
Control system: Allen-Bradley, relay logic
Voltage: 480V/3PH/60Hz
Full load amps: 91 A
Accessories: Exhaust fan, solution heat auto-timer
General: Stainless steel fabrication, Stainless steel removable canopy, vertical solution pump
Status: Level 2 – (Complete)
Aquamaster CB-2400 (Machine #250) – PENDING RETURN
Conveyorized belt cleaning system
Machine type: Conveyorized Belt
Model: Aquamaster CB-2400
Serial number: 250-0000
Process stages/zones: Wash, ambient blow-off
Product capacity: 24″ belt width x 18″ clearance
Heat type: Electric
Control system: Relay logic
Voltage: 480V/3PH/60Hz
Full load amps: 159A
Accessories: Exhaust fan, solution heat auto-timer, oil skimmer, dual micro-filtration, chemical injection, load product shutdown timer, interior lighting and viewing window
General: Stainless steel fabrication, vertical solution pump.
Status: Pending return
Please note: This parts washer is pictured as originally sold, and should be used for reference only.
Aquamaster CC-600 (Machine #521)
Machine type: Return-To-Operator
Model: Aquamaster CC-600
Serial number: 0521-1009
Process stages/zones: Wash, ambient blow-off
Product capacity: Load Area 11.25″
Product opening: 22″
Heat type: Electric
Control system: Allen-Bradley PLC with HMI control
Voltage: 480V/3PH/60Hz
Full load amps: 68A
Accessories: Mist Collector, Oil skimmer, Micro filtration, Solution head auto-timer, Light curtain
General: Stainless steel fabrication, Stainless steel, horizontal solution pump
Status: Level 2 – In Process
Please note: This used parts washer is pictured during the reconditioning/rebuilding process, and should be used for reference only.
Aquamaster CC-600 (Machine #657)
Machine type: Return-To-Operator
Model: Aquamaster CC-600
Serial number: 0657-0413
Process stages/zones: Wash, Ambient blow-off
Product capacity: Good for consistent tubular / Shaft type components
Product opening: 22″
Heat type: Electric
Control system: Allen-Bradley PLC with HMI control
Voltage: 480V/3PH/60Hz
Full load amps: 67.3 FLA
Accessories: Mist collector, micro-filtration, oil skimmers, solution heat auto-timer, light curtain
General: Stainless steel fabrication, Stainless steel, horizontal solution pump
Status: Level 2 – In process
Please note: This used parts washer is pictured during the reconditioning/rebuilding process, and should be used for reference only.
STOELTING
Machine type: Conveyorized Belt – Electric Heat
Model: VSF(i) – 212
Process stages/zones: Electric heated wash with Immersion/turbulation & spray, Blow-off, electric heated rinse, and electric heated blow off stages. Machine includes a filter on the wash stage, oil coalescer, stainless steel ½ x ½ inch belting with flights, full support frame under machine and casters.
STATUS: Level 1 (Complete)
AQUAMASTER CB-1600D
Machine type: Conveyorized Belt
Model: Aquamaster CB-1600D
Serial number: 718-0914
Process stages/zones: Wash, ambient blow-off
Product capacity: 16″ wide x 50″ tall
Heat type: Electric
Control system: Allen-Bradley, relay logic
Voltage: 480V/3PH/60Hz
Full load amps: 173.4 A
Accessories: Exhaust Fan System, Micro filtration chamber, ambient blowoff, Extended conveyor load and or unload, guide rail.
General: Stainless steel fabrication, Fiberglass removable canopy, horizontal solution pump
Status: Level 1 – Complete
AQUAMASTER CB-1200E (Machine #861) SOLD
Machine type: Conveyorized Belt
Model: Aquamaster CB-1200E
Serial number: 0861-0617
Process stages/zones: Wash, rinse and blowoff module
Product capacity: 12″ wide x 12″ high product opening. Load/Discharge height is 2’11
Heat type: Electric
Control system: NEMA 12 enclosure with a fused-type disconnect switch and magnetic starters with safety overload elements
Voltage: 480V/3PH/60Hz
Full load amps: 100.3A
Accessories: Exhaust fan, solution heat auto-timer
General: 12-gauge Type 304 Stainless steel fabrication, Stainless steel removable canopy, 3/4 HP horizontal cast iron centrifugal pump
Status: Level 2 – In Process
AQUAMASTER CB-1200E (Machine #862) SOLD
Machine type: Conveyorized Belt
Model: Aquamaster CB-1200E
Serial number: 0862-0617
Process stages/zones: Wash, rinse and blowoff module
Product capacity: 12″ wide x 12″ high product opening. Load/Discharge height is 2’11
Heat type: Electric
Control system: NEMA 12 enclosure with a fused-type disconnect switch and magnetic starters with safety overload elements
Voltage: 480V/3PH/60Hz
Full load amps: 100.3A
Accessories: Exhaust fan
General: 12-gauge Type 304 Stainless steel fabrication, Stainless steel removable canopy, 3/4 HP horizontal cast iron centrifugal pump
Status: Level 2 – In Process
AQUAMASTER CB-1400E (Machine #532)
Machine type: Conveyorized Belt
Model: Aquamaster CB-1400E
Serial number: 0532-0210
Process stages/zones: Wash, rinse and heated blowoff module
Product capacity: 14″ wide x 9″ high product clearance. Discharge height is 35″
Heat type: Electric
Control system: Solution tank is equipped with a 3-position level control and 1/2″ fill solenoid valve
Voltage: 480V/3PH/60Hz
Full load amps: 100.3A
Accessories: Exhaust fan system, Micro filtration system
General: 12-gauge Type 304 Stainless steel fabrication, Fiberglass removable canopy, horizontal cast iron pumps
Status: Level 1 – In Process
Through our R3 program, we’re making a measurable difference for the planet—creating oxygen, removing CO₂ from the atmosphere, and diverting thousands of pounds of waste from landfills. Every action contributes to cleaner air, reduced emissions, and a more sustainable future for the communities we serve.
Reconditioned Parts Washer Inquiry
Please fill out this form if you are interested in purchasing one of the reconditioned used industrial parts washers listed for sale on this page.